Hot Air Burners are used on steel reheat furnaces, glassmelters, non-ferrous melters, rotary calciners, and other applications where low velocity luminous flames are desired.
4001 Burners provide soft luminous flames when burning natural or coke oven gas in large open furnaces, such as slab or billet heaters.
Standard 4001 Burners use high pressure "tip emulsion" atomizers with steam or compressed air. Resultant clean, highly luminous, well-defined flames are slightly shorter than natural gas flames.
Control Systems4001 Burners operate from 0.2"wc main air pressure to 10"wc or higher. High fire air rate usually is between 2"wc and 6"wc. Ignition And Flame SupervisionA Pilot assembly is normally used to light the burner. Ignition sequence should provide for low fire start between 0.2 and 1.0"wc main air pressure. |
||